Why Is My Fridge Leaking Water Onto The Floor?

refrigerator repair

Why is my fridge leaking water onto the floor? If you are asking this question, this might be the first time you are seeing the water. Although it’s a common issue, water pudding under the fridge is never a good sign and you have a reason to be worried.

Thankfully, according to refrigerator repair professionals, the problem is often easy to fix. If you are having the problem, here are some of the common reasons for it and what you can do about it:

You have left the refrigerator door open for a long time

If you leave the refrigerator door open for a long time, the fridge will slowly build up water due to the incoming warmer air. This can sometimes overwhelm the evaporator systems leading to leaks.

To fix the problem, you simply need to close the fridge door. To prevent the problem from coming about in the future, avoid leaving the door open for extended periods of time.

If you have a modern refrigerator with an alarm that signals when the door is open for a long time, turn it on.

The fridge isn’t level

If you recently purchased the fridge, recently remodeled your kitchen floor, or moved to a new house and you just realized water under your fridge, the appliance might not be level.

When the fridge isn’t level, the coolant doesn’t flow freely, and it pools in the pipes, forcing the fridge to work harder than it should. This creates extra condensation around the coils that end up dripping water on the floor.

To fix this, you need to level the fridge. Place a level on the floor of the fridge then make the adjustments.

To make adjustments, remove the grill from the front bottom and adjust the legs or rollers. You might need a screwdriver or wrench depending on the model of the appliance.

To ensure this doesn’t happen again, aim for a ¼ to ½ inch rise in the front and check the level.

The water inlet valve is damaged

The water line connects to the back of the fridge and it can be damaged or loose leading to water leaks. The water inlet valve that connects the waterline at the back of the fridge might also have a slight leak causing a water puddle.

To fix the issue, you need to find the source of the problem. Unplug the fridge from the power and slide it out from the wall. Then use a flashlight and check if the waterline or water valve has any leaks.

If there are any leaks present, tighten up the leaking area or remove or replace the affected parts.

Blocked defrost drain

The defrost drain clogs because of food particles and other debris. As a result of the clog, ice builds up, and eventually, water leaks out of the freezer and fridge.

To fix the problem, you should flush the drain from the inside of the freezer with warm water using a small funnel or turkey baster. You can also use a coat hanger or pipe cleaner to forcibly remove the clogging material.

If this doesn’t work, manually remove the debris causing the clog.

What if you can’t find the source of the leak?

If you inspect the appliance and you can’t find the source of the leak, contact an appliance repair Springfield professional to help you out. A professional contractor will carefully troubleshoot your refrigerator and fix the problematic areas.

For peace of mind, the contractor will do a good job, take your time when hiring. Ensure the contractor is experienced enough. It also doesn’t hurt hiring an insured technician as accidents happen anytime and you don’t want to be liable when they happen.

Dishwasher Repair: 5 Ways To Keep Your Dishwasher Functioning Optimally

dishwasher repair

Modern dishwashers save you time, labor, and water. Unfortunately, they don’t always work the way you want them to.

If you have had your appliance for a significant amount of time, you must have opened it to find the glasses covered with spots or even food residues on the plates.

According to dishwasher repair professionals, there are several things you can do to keep your appliance functioning optimally. Some of these things include:

Scrape off the food

Dishwashers have over the years become intelligent and extremely effective in their working. Unfortunately, they easily clog up from large food pieces. Before you put the dishes in the dishwasher, check whether there are large pieces of food that you can remove.

If present, scrape them off using a spoon.

If you aren’t looking to clean the dishes immediately, pre-rinse them at the sink before you place them in the dishwasher.

If the dishes are going to stay in the dishwasher the entire day, run a rinse only cycle. This is to prevent the food from drying on the plates. The cycle also prevents odors from resulting.

Secure all the plastics

Are you cleaning plastics in the dishwasher? Ensure the plastics are appropriately secured. If you fail to do it, water blasts will cause the pieces to flip over, fill with water, fall onto the exposed heating elements and melt.

Before you run a cycle, confirm that the dishes are properly secured to the sides of the dishwasher.

Load the dishes strategically

While you are simply looking to clean the dishes, you won’t clean them properly if you load them haphazardly. You need to be strategic for you to get the most of your appliance.

Load the plates and bowls so that the dirty side faces the direction where the water spray is strongest, which is usually at the center of the rack. For best cleaning results, angle the pans, pots, and casseroles down.

When loading the appliance, be on the lookout for long, thin handles such as serving spoons and whisks as they slip through the racks, preventing the spray arm from spinning freely.

Spoons nest together, which prevents them from cleaning as well as they should. When loading the spoons, ensure this doesn’t happen.

You can do this by placing some of the spoons with the handles up and others down so that all of them get washed.

Place the forks facing up so that the tines get as clean as possible. For the knives, the blade should face down for safety reasons. You should be cautious when loading so you don’t get injured.

When it comes to the glasses, place them between the tines. This is to prevent the glasses from spotting or cracking.

To prevent water from pooling at the base of the upside-down cups, angle the cups as much as the rack design will allow it.

Wine glasses are known to break when loading, so be ultra-cautious with them. To prevent breakage, don’t let them bump against each other. You also should prevent them from hitting the top of the dishwasher.

Choose the right cleaning program

Just like washing machines, dishwashers have different programs that vary depending on your washing needs. Modern dishwashing machines allow you to configure them depending on how dirty the dishes are.

For you to properly clean the dishes, take time to understand the different programs in your machine, and how to use them properly.

Don’t overload the machine

Appliance repair Fairfax professionals report that this is one of the primary mistakes people make when operating their dishwashers. In the bid of saving time and maximizing their loads, they put a lot of plates than the dishwasher can carry.

What is the end result? The dishwasher fails to function as well as it should.

Regardless of how busy you are, don’t load the appliance more than it can handle.