Sewer Cleaning Companies: Tips On How To Get Rid Of Sewer Gas Smell

sewer cleaning companies

When you smell sewer gases in your home, it means you have a serious problem you should address as soon as possible.

According to sewer cleaning companies, the gases are a combination of ammonia, hydrogen sulfide, and methane, and continuous exposure to them leads to memory loss, poisoning, headaches, dizziness, and asphyxiation. In large enough amounts, these gases put your home at the risk of fire or even an explosion.

Have you been smelling the gases in your home and are worried of your life and health? Here are tips on how to get rid of the sewer gas smell:

Clean the sink overflow

The sink overflow is the hole located underneath or across the faucet. The sink overflow is often prone to accumulation of bacteria, hair, and soap scum, and when a clog happens, foul smells result from the sink. If you live in areas with hard water, mineral buildup can also prevent the overflow from draining as well as you would want it to.

To eliminate the awful smells, you need to identify the source of the odors and if the smell is coming from the sink overflow, clean it. You can use a small bottle brush to clean out the hole or wipe away any present buildup. You can also mix a solution of chlorine bleach and half water and clear out any grime present in your sink.

Caulk the toilet base

If your toilet isn’t currently caulked, chances are water is leaking out, creating an unpleasant smell. You can bring these smells to a stop by caulking the toilet to the floor. This not only eliminates the smells, but it also secures the toilet, which is a win-win for you as a homeowner.

The cool thing is you can do it on your own (if you love DIY projects) without involving a technician. To do it:

Remove any caulk from around the toilet base using a razor knife or utility knife. You should then clear away any debris using a general bathroom cleaner then apply masking tape to the floor around the toilet. With the caulk or caulk gun at 45 degrees, place the caulk along with the space between the toilet and floor. Once you are done, peel off the masking tape you had applied earlier.

Clean out any bacteria growing in your drains

If you rarely clean your drains, they might be full of soap scum and organic matter that provide the perfect environment for bacteria to thrive. Luckily, you can easily clean out the existing bacteria and prevent new bacteria from growing.

Two of the easiest ways to do it is to use baking soda and vinegar, and enzyme-based cleaners. To clean the drains using baking soda and vinegar, mix the two in the target drains and listen to the sizzling and bubbling noises that signify the mixture is working. Wait a few minutes, then flush the toilet or run water down the drain.

If the smell still won’t go away, repeat the process.

If the above still won’t get rid of the smells, try getting rid of them using enzyme-based cleaners. These cleaners are excellent bacteria cultures and concentrated enzymes that naturally eat away at the organic matter.

The chances are that if the sewer smells are due to dirty drains, doing this will eliminate the odors.

Take a look at bathtubs and sinks.

Are there bathrooms or sinks in your house you rarely use? They might be the culprits. Run hot water down the drains, and this will ensure the P-trap is full hence keep the bad smells away.

When you do the above, you have a 95% chance of putting the embarrassing smells away. If you have done everything, but still they linger around, contact commercial drain cleaning services Westchester providers to inspect your system as you might be having a more severe problem.

What Can Cause a Furnace To Stop Working? Furnace Services Providers Reveal The Causes

furnace services

The electricity is on, the TV is blaring, you are wearing your coziest thick socks, and then the air turns cold.

No, you aren’t outside. You are on your favorite sofa, and the cold air is due to a furnace that has stopped working. The question is, what can cause a furnace to stop working? Plenty of reasons.

Here are five common issues (given by furnace services providers) that can cause your furnace to stop working and what you can do about it:

You have a problem with your thermostat

The thermostat is the control center of the furnace—it tells it what to do. When the temperature is high enough, the thermostat tells the control board inside the furnace to stop heating the house.

When the temperature falls below a certain level, the same thermostat notifies the furnace to start producing heat.

When the thermostat isn’t functioning correctly, it doesn’t signal the furnace to start heating when the temperatures are low hence the cold.

To troubleshoot, set the thermostat at least five degrees above the room temperature and see whether it comes on.

Sometimes the solution is as simple as replacing the batteries. In other cases, you may have to replace the thermostat, especially if you have had it for more than a decade.

The furnace is leaking

If you are new with heating systems, you might be wondering why a unit meant to heat the house is producing water.

Well, this can happen due to many reasons including: plumbing leaks, humidifier leaks, clogged internal draining systems, and many other reasons.

If your unit has had a leakage and you hadn’t fixed it, the furnace will stop working.

Leakages are a complex issue, and you should avoid trying to fix them if you don’t have the right skills. Let an expert inspect the condensate pump and confirm its working properly.

The technician can repair or replace it depending on the extent of the damage.

You have issues with your gas line

Do you have a gas furnace? It can fail to work if you are having problems with the gas line. The first thing you should do is to confirm that the gas is turned on. You can do this by checking the shut-off valve on the outside.

You also should start another gas-burning appliance such as the stove. If it works, the gas is flowing, and you might be having a problem with the gas supply to the furnace itself.

Can you smell gas? You must be having a leakage. A gas leakage is worse than a malfunctioning furnace, so you should address it immediately, you notice it.

The filters are too dirty

When is the last time you cleaned the filters? Air filters trap dust, dirt, and debris, and when you don’t clean them early enough, these materials can clog the unit, restricting or even blocking the vital airflow.

This results in high house heating costs, overheating of the heat exchanger, and failure of the furnace to work.

Unlike when having a gas leak, you can fix this problem by yourself as all you need is to use the manufacturer’s manual to access the dirty filters. Depending on how they look, you can clean or replace them.

You haven’t turned on the furnace

While it sounds like a no-brainer, you will be shocked to realize the number of owners that call emergency furnace repair services Arlington VA providers to repair their furnaces, and yet all they did is to forget turning it on.

If your furnace isn’t working, check at the back for the power switch. Is it on or off? While at it, also check the circuit breaker and fuse.